1968 - 1974 GM X-Body Nova / Ventura / Apollo Windshield and Rear Window Rust Repair Channels





NEW!  TRUNK GUTTER STOCK

rear window rust repair,window channel patch panels,Chevelle,Monte Carlo,GTO,LeMans,Tempest,Cutlass,Camaro,Firebird,Beldenspeed,Belden Speed & Engineering,F Body,A Body,Skylark,Nova,El Camino,Grand Prix,windshield channel,Second Gen,Gen 2,trim clip studs,trunk gutter rust,trunk gutter repair patch
rear window rust repair,window channel patch panels,Chevelle,Monte Carlo,GTO,LeMans,Tempest,Cutlass,Camaro,Firebird,Beldenspeed,Belden Speed & Engineering,F Body,A Body,Skylark,Nova,El Camino,Grand Prix,windshield channel,Second Gen,Gen 2,trim clip studs,trunk gutter rust,trunk gutter repair patch




All channels and patches are manufactured in the USA from 20 ga. CRS (WINDSHIELD CHANNELS 18 GA.), etch-weld primed and pre-punched for plug welding (where applicable) for easy installation.

VIEWING ON A SMARTPHONE?  PLEASE ROTATE YOUR PHONE 90 DEGREES TO SEE PRICING IN RIGHT HAND COLUMN

2019 PRICING (Please refer to the diagrams at the top of the page for part numbers)

Call Out Part NumberDescription  Unit Price
  Windshield Channels  
 A6874-PSWLDXBDY 
NEW!
1968 - 74 Nova/Ventura/Apollo Windshield Top Channel - Passenger Side $50.00 + shipping 
 B6874-DSWLDXBDY 
NEW!
1968 - 74 Nova/Ventura/Apollo Windshield Top Channel - Driverr Side  $50.00 + shipping  
 C 6874-PAWLDXBDY
NEW!
1968 - 74 Nova/Ventura/Apollo Windshield A-Pillar Patch Channel - Passenger Side  $50.00 + shipping  
 D6874-DAWLDXBDY 
NEW!
1968 - 74 Nova/Ventura/Apollo Windshield A-Pillar Patch Channel - Driver Side  $50.00 + shipping 
   Rear Window Patches & Channels 
G 6874-DSXBDY1968 - 74 Nova/Ventura/Apollo  Quarter Rear Window Repair Channel - Driver side
NOTE:  Does Not Fit Hatchback
 $40.00 + shipping
 H  6874-PSXBDY1968 - 74 Nova/Ventura/Apollo  Quarter Rear Window Repair Channel - Pass. side
NOTE:  Does Not Fit Hatchback
 $40.00 + shipping
E  6874-RLXBDY1968 - 74 Nova/Ventura/Apollo Roof Window Repair Channel Half - Driver side
NOTE:  Does Not Fit Hatchback
 $30.00 + shipping
F 6874-RRXBDY1968 - 74 Nova/Ventura/Apollo  Window Repair Channel Half - Passenger side
NOTE:  Does Not Fit Hatchback
 $30.00 + shipping
  Trunk Gutter Stock 
 GM-TG24  Trunk gutter profile.  3/16" x 9/16" x 3/4" - 24" long pieces.  Manufactured in 20 gauge CRS - straight profile $12.50 + shipping 
   Hardware 
 
 Window Trim Clip  Stud  Screws - Phillips head #4-24  studs for front and rear  window trim clips.  Use no larger that 3/32" drill for the hole.
QUANTITY = 20 screws
 rear window rust repair,window channel patch panels,Chevelle,Monte Carlo,GTO,LeMans,Tempest,Cutlass,Camaro,Firebird,Beldenspeed,Belden Speed & Engineering  $7.00 + shipping
 
 Window Trim Clip Stud Rivets - Pop-rivet style insertion for a more factory-correct look.  Rivets are made from Aluminum so rust of the rivet itself is a non-issue.    Use a #41 drill for the hole.
QUANTITY = 10 rivets
 
rear window rust repair,window channel patch panels,Chevelle,Monte Carlo,GTO,LeMans,Tempest,Cutlass,Camaro,Firebird,Beldenspeed,Belden Speed & Engineering,F Body,A Body
 $15.00 + shipping
  Window Trim Clip Stud weld-on style insertion for an authentic factory-correct restoration.  Rivets are copper-plated steel.    Stud welder with appropriate tip required.  For Uni-Spotter #HS1005 Tip,  for Motorguard #J20009 Tip.
QUANTITY = 25 studs 
 
 $7.00 + shipping 
 
 Rear Window Trim Clips - Replaces GM P/N 9808241 and typical for for 1968 & newer GM X-Bodies.  Check your existing clips against the photo.
QUANTITY = 20 clips
 
rear window rust repair,window channel patch panels,Chevelle,Monte Carlo,GTO,LeMans,Tempest,Cutlass,Camaro,Firebird,Beldenspeed,Belden Speed & Engineering
 $14.00 + shipping
  Windshield Trim Clips - 1968-1974 GM X-Body trim clips.  Check your existing clips against the photo.
QUANTITY = 20 clips
 
$14.00 + shipping 
   Window Foam Dam  Tape -  3/13" X 3/16".  Single sided  adhesive dam tape for setting  windshields and rear  window glass with Urethane.
 EACH ROLL = 18'  
 
rear window rust repair,window channel patch panels,Chevelle,Monte Carlo,GTO,LeMans,Tempest,Cutlass,Camaro,Firebird,Beldenspeed,Belden Speed & Engineering
 $9.00 + shipping
 Glass Setting Blocks - Hard Rubber 3/8" x3 /8" x 1".  Cut to desired height and set your glass!  
Quantity = 5 Blocks 
 
$4.00 + shipping 
  Glass Setting Blocks - Hard Rubber 3/16" x 7/8" x 2".  To be cut to size, but already 3/16" in thickness.  Quantity = 4 Blocks
 
$5.00 + shipping  
 Dow Betaseal Urethane U-418 w/tip.  NOTE: This is a "primerless" Urethane meaning that you do not need to prime the glass surface; however as with all Urethanes, you should prime the channel surface to promote adhesion to the channel.  Dow Betaprime primer is suggested.
 
$14.00 + shipping 
  Dow Betaprime 5504 Single Use channel primer.  To be used on your painted stationary glass channel bottom to promote adhesion between the Urethane and channel.  Not to be used on the glass. (one use per window) 
 
 $10.00 + shipping

How To Order From Us

At Belden Speed & Engineering the ordering process for our rust repair products is different for a reason.  We believe rust repair and patch panels is not a “one size fits all” business so we are a bit more interactive than others.  We prefer you to send us pictures of your rust-affected areas, but it isn’t mandatory – we will happily sell you what you’d like, but we prefer to sell you what you need and will give you the best outcome.

Here is how it works:  Once you (or we) determine which parts you need and we have your Zip Code to get an accurate shipping cost we send you a PayPal Invoice to your email for you to pay directly from.  YOU DO NOT NEED TO HAVE A PAYPAL ACCOUNT – YOU CAN USE ANY MAJOR CREDIT OR DEBIT CARD AND PAY WITH NO OBLIGATION TO OPEN A PAYPAL ACCOUNT.  If you do not care to do the transaction through PayPal then we also accept personal checks.  Let us know and we can send you the information on where to send the check.

Once the funds have been received we typically ship your order same day for funds received before 10:00 AM EST via USPS Priority Mail.  Transit time is typically 2-3 business days from shipment to anywhere in the USA.

Ready To Order?  Send us an email at info@beldenspeed.com and include either a picture of your rust, a description of your problem or the part numbers you’d like to order along with the make and model of your car and your Zip Code.  We will respond quickly and professionally!

We Ship Internationally!

Have Questions?  Email Us Today - Prompt and Professional Reply - ALWAYS (we typically respond 7 days a week and after hours - give us a try)

info@beldenspeed.com

Ċ
Dane Belden,
Aug 17, 2018, 2:09 PM